SAFETY INFORMATION

Wax Melt and Burner Safety Info

​

Wax melts should only be used in appropriate wax melt warmers. Add one block of wax melt from the pack at a time . Do not over fill the wax melt warmer as wax will spill over.

​

If wax remains in the burner bowl after use and you wish to remove it, you can soak up the melted wax with cotton balls or if the wax has hardened, either turn on your electric warmer or light a tealight in the burner for 1 minute then gently apply pressure on the hardened wax until it pops out in one piece.  Do not use metal or sharp objects to clean out wax as this may crack or damage the warmer or cause injury.

 

Wax Melt Warmers (non-electrical) Failure to follow these instructions could result in a fire hazard . 

•Never leave a burning candle unattended or move it when lit. 

• Remove all packaging before use. Only use with a good quality tea-light. Do not use with an 8 houri tea-light, votive or other candle. 

• Keep the Wax Melt Warmer and tea-light out of the reach of children and pets. 

• Do not burn the tea-light or leave the wax melt burner on or near anything that can catch fire. 

• Keep foreign objects out of the wax pool. 

• Extinguish the tea-light if the flame becomes enlarged, makes contact with the wax melt burner, or begins to smoke. 

• Use a candle snuffer to extinguish the flame. Once extinguished allow wax melt burner to cool before moving.

 

Direction for Use 

• Place the wax melt warmer on a level, flat, cool, heat resistant surface away from draughts, other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the wax melt warmer is used without a protective plate, tray or similar product.  

• Position the wax melt segment on the top bowl of the wax melt warmer.  

• Insert a tea-light in the bottom base of the wax melt warmer. 

• Allow the heat of the tea-light to melt the wax and fragrance will release into the room. The wax melt warmer will become hot while in use, do not touch while in use, heated wax can cause burns. Allow the warmer to cool completely before touching or moving. 

​

​

• DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX. DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE BURNER.